Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: mac 26 bilge pump #3267
    Charles CurtisCharles Curtis
    Participant

    Rob,

    Attached is an image of my forward bilge pump. It isn’t currently working properly (as can be seen by the water in the bilge). I also have a manual bilge pump that takes suction from that frame. The bilge pump discharges (when it is actually working) from behind the head.

    You must be logged in to view attachments.

    in reply to: mac 26 bilge pump #3265
    Charles CurtisCharles Curtis
    Participant

    Rob,

    Will do. I’ll dig through my pictures later today to see if I have any already. Otherwise I’ll climb up there when it eventually stops raining…

    I’m planning on a full refurbishment of the plumbing and electrical systems. The bilge pumps as installed are only manually controlled (no automatic switch).

    Chuck

    in reply to: mac 26 bilge pump #3263
    Charles CurtisCharles Curtis
    Participant

    I am working on restoring the same. The boat I have has two bilge pumps. One aft under the engine, and one just forward of the seats. I can get you a picture later if you would like.

Viewing 3 posts - 1 through 3 (of 3 total)