Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • 15th January 2022 at 11:08 in reply to: New to the group #3649
    Michael mcHughMichael mcHugh
    Participant

    I have reduced the asking price on my MacWeste 26. It’s a project but not too difficult for someone who knows what they are doing. I am just not getting the help I need from the yard. I have to wait months for the simplest jobs. I really want an enthusiast to have her and not the yard.

    10th January 2022 at 11:03 in reply to: New to the group #3636
    Michael mcHughMichael mcHugh
    Participant

    I have just put up my Mac 26 for sale in Newhaven. Where are you based. the ad is on the site.. Michael.

    20th April 2021 at 09:37 in reply to: Rubbing strake. #3407
    Michael mcHughMichael mcHugh
    Participant

    A mac 26, built in 1970.

    19th April 2021 at 16:14 in reply to: Rubbing strake. #3405
    Michael mcHughMichael mcHugh
    Participant

    Thanks Chris. I have been in touch and they want to know how many metres I need. I hoped you might have your original measurements to double check any I might make.

    19th April 2021 at 10:33 in reply to: Rubbing strake. #3403
    Michael mcHughMichael mcHugh
    Participant

    Chris do you have the measurements handy for the b extrusion? Assuming it was for a mac 26. Michael.

    16th February 2021 at 11:26 in reply to: Genoa #3358
    Michael mcHughMichael mcHugh
    Participant

    https://www.youtube.com/watch?v=3oLhwI2gsVI Just saw this. No idea how expensive it is. The furling gennaker seems easy to handle short handed. Not a recommendation, just a thought.

    27th January 2021 at 10:37 in reply to: Zinc Anode #3351
    Michael mcHughMichael mcHugh
    Participant

    Thanks everyone. I’ll get them after i have done the antifoul.

    16th January 2021 at 15:56 in reply to: Zinc Anode #3344
    Michael mcHughMichael mcHugh
    Participant

    Thanks Linda. The bolts appear to be missing. Will it keep the water out when fitted? I can see the ground through the bolt holes in the block. Michael.

    28th October 2020 at 09:16 in reply to: Cockpit lockers. #3209
    Michael mcHughMichael mcHugh
    Participant

    Once again Thanks.

    28th October 2020 at 09:15 in reply to: Stanchions #3208
    Michael mcHughMichael mcHugh
    Participant

    Thanks Chris.

    28th October 2020 at 09:13 in reply to: Samson post. #3207
    Michael mcHughMichael mcHugh
    Participant

    Thank you Chris.

    27th October 2020 at 12:31 in reply to: Rubbing strake. #3199
    Michael mcHughMichael mcHugh
    Participant

    Thank you both for your replies.I’ll look into the B Section option. i’m more concerned about leaks and damage to the gel coat than looks.

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)